MilTech Support Tools
Replaceable Connectors are supported with a series of easy-to-use hand tools and shop aids to allow straightforward connector maintenance in the field (if needed), and to assist with difficult cable installations.
Maintenance and Installation Tool drawings and instructions
Click on the tool drawing images to download copies.
COMMON SPANNERS
TORQUE WRENCHES AND ADAPTERS
STYLE 123, 125 and 137 INSTRUCTIONS
COMMON SUPPORT TOOLS
Some of the more common (and helpful) support tools are listed here - (Not sure which you need?)
| Category | Model Number | TMS STK No. | Description |
| Front End Installation | |||
| TN3176-1 | TN3176-1 | Small Universal Spanner Wrench (0.420" - 0.688") | |
| TN3176-2 | TN3176-2 | Large Universal Spanner Wrench (0.660" - 0.875") | |
| TN550-xxx | TN550-xxx | Fixed Spanner Wrench (See preferred replacement TN-3176-x above) | |
| TN552-xxx | TN552-xxx | Torque Adapter (contact TMS) | |
| Cable Assembly Installation | |||
| TN2786 | TN2786 | Cable Puller (-125) (DELRIN 500) | |
| TN897 | TN897 | Cable Puller (-125) (Stainless) | |
| TN3239 | TN3239 | Cable Puller (-137) (DELRIN 500) | |
| TN3382 | TN3382 | Cable Puller (-141) (DELRIN 500) | |
| Torque Wrenches and Adapters | |||
| 3190-1380 | 3190-1380 | Break-Over Torque Wrench - Preset to 8.5 in. lbs. (SMA) (silver) | |
| 3190-1381 | 3190-1381 | Break-Over Torque Wrench - Preset to 23 in. lbs. (TNC, NM, Etc.) (blue) | |
| 3190-1382 | 3190-1382 | Break-Over Torque Wrench - Preset to 50 in. lbs. (Replaceable Front Ends) (black) | |
| 3190-1733 | 3190-1733 | Break-Over Torque Wrench - Preset to 12 in. lbs. (Ruggedized 3.5 mm) (green) | |
| CH-150 | 3190-101 | Torque Wrench: Utica CH-150 (30 - 150 in-lb) | |
| 3190-1228 | 3190-1228 | 1/4" Open-end adapter for Break over Torque wrench | |
| 3190-1229 | 3190-1229 | 5/16" Open-end adapter for Break over Torque wrench | |
| 3190-1230 | 3190-1230 | 11/32" Open-end adapter for Break over Torque wrench | |
| 3190-1231 | 3190-1231 | 3/8" Open-end adapter for Break over Torque wrench | |
| 3190-1232 | 3190-1232 | 7/16" Open-end adapter for Break over Torque wrench | |
| 3190-1233 | 3190-1233 | 1/2" Open-end adapter for Break over Torque wrench | |
| 3190-1234 | 3190-1234 | 9/16" Open-end adapter for Break over Torque wrench | |
| 3190-1235 | 3190-1235 | 5/8" Open-end adapter for Break over Torque wrench | |
| 3190-1236 | 3190-1236 | 11/16" Open-end adapter for Break over Torque wrench | |
| 3190-1237 | 3190-1237 | 3/4" Open-end adapter for Break over Torque wrench | |
| 3190-1363 | 3190-1363 | 13/16" Open-end adapter for Break over Torque wrench | |
| 3192-057 | 3192-057 | 7/8" Open-end adapter for Break over Torque wrench | |
COMMON REPLACEMENT FRONT END LIST: 137 and 125 Styles
This list provides links to drawings illustrating the most common replacement front ends manufactured by Times.
These and many other replaceable front end parts allow support of fielded cable assemblies with easy-to-install replacement parts.
Click on the Interface below to access replaceable connector drawings.
| Interface | Type | Straight or Angle | Angle | Notes | TMS PN |
| 125M TO F | 125 | A | 90° | M-F INTERMEDIATE ADAPTER W/ORIENTATION | 48661 |
| ATNCF | 125 | S | BULKHEAD Ø0.810 FLANGE | 48590 | |
| ATNCFB | 125 | A | 90° | BLOCK ANGLE W/LOCKWIRE | 48609 |
| ATNCFB | 125 | S | JACK W/LOCKWIRE | 48621 | |
| ATNCM | 125 | S | ATNCM W/LOCKWIRE | 48555 | |
| ATNCM | 125 | A | 90° | BLOCK ANGLE W/LOCKWIRE | 48573 |
| ATNCM | 125 | S | SELF-LOCKING | 48606 | |
| ATNCM | 125 | A | 90° | SELF-LOCKING BLOCK ANGLE | 48645 |
| CM | 125 | S | CM | 48613 | |
| CM | 125 | A | 90° | BLOCK ANGLE | 48614 |
| HNM | 125 | S | HNM W/ LOCKWIRE | 48507 | |
| HNM | 125 | A | 90° | BLOCK ANGLE W/LOCKWIRE | 48696 |
| NFB | 125 | S | BULKHEAD Ø0.875 FLANGE | 48667 | |
| NM | 125 | A | 90° | BLOCK ANGLE W/LOCKWIRE | 48628-1 |
| NTM | 125 | A | 90° | SELF-LOCKING BLOCK ANGLE | 48647 |
| NTM | 125 | S | NM W/LOCKWIRE, SLOTTED OUTER CONT, 3/4 HEX NUT | 48721 | |
| SCF | 125 | S | BULKHEAD Ø1.250 FLANGE | 48680 | |
| SCM | 125 | S | SCM W/LOCKWIRE | 48642 | |
| SMAM | 125 | S | SMAM W/LOCKWIRE | 48530 | |
| SMAM | 125 | A | 90° | LOW PROFILE ANGLE W/LOCKWIRE | 48608 |
| ATNCFB | 137 | TA | 90° | TI BLOCK ANGLE | 47522 |
| ATNCM | 137 | TAL | 90° | TI SELF-LOCKING BLOCK ANGLE | 47514 |
| 137M TO F | 137 | TA | 90° | TI M-F INTERMEDIATE ADAPTER | 48887 |
| 137M TO F | 137 | A | 90° | M-F INTERMEDIATE ADAPTER | 48810 |
| ATNCM | 137 | S | SELF-LOCKING | 48782 | |
| ATNCM | 137 | A | 90° | SELF-LOCKING BLOCK ANGLE | 48783 |
| ATNCM | 137 | A | 45° | SELF-LOCKING BLOCK ANGLE | 48814 |
| ATNCM | 137 | A | 90° | BLOCK ANGLE W/LOCKWIRE | 48858 |
| M8P | 137 | S | M8P | 48701 | |
| M8P | 137 | A | 90° | BLOCK ANGLE | 48718 |
| M8P | 137 | A | 90° | EXTENDED BLOCK ANGLE | 48719 |
| M8S | 137 | S | M8S | 48702 | |
| M8S | 137 | A | 90° | BLOCK ANGLE | 48807 |
| M8S | 137 | A | 45° | BLOCK ANGLE | 48849 |
| M8S | 137 | A | 45° | EXTENDED BLOCK ANGLE | 48850 |
| NM | 137 | A | 90° | BLOCK ANGLE W/LOCKWIRE | 47508 |
| NTM | 137 | S | NM W/LOCKWIRE | 47506 | |
| NTM | 137 | AL | 90° | SELF-LOCKING BLOCK ANGLE | 47532 |
| SMAF | 137 | S | SMAF | 47537 | |
| SMAM | 137 | S |